Seta Homes
Order on Instagram
  1. Home
  2. Candle care

How to burn a soy candle so it lasts

Burn it the first time until the wax melts to the edge, trim the wick to 5 mm, and stop after 4 hours. This guide explains why.

By Seta Homes. Last updated .

The first burn decides everything

Wax has a memory. The first time you light a jar candle, let it burn until the melted pool reaches the glass all the way round. For most Seta Homes jars that takes 2 to 3 hours.

If you put it out sooner, the candle will follow that smaller ring on every later burn and tunnel down the middle, leaving unused wax on the sides.

Trim the wick to 5 mm

Before each burn, once the wax is cold, trim the wick to about 5 mm. A long wick makes a tall, smoky flame and burns through the wax faster. Wooden wicks can be snapped off gently with your fingers, removing the charred tip.

Keep each burn under 4 hours

After about 4 hours the wax gets too hot, the scent thins out and the wick can mushroom. Put the candle out, let it set for 2 hours and trim before relighting.

Soy candles in a Dubai summer

Soy and coconut wax soften in heat. Keep candles out of direct sun, away from windows and out of a parked car. If the surface sweats small beads of oil or turns slightly uneven, it is cosmetic and the candle will burn normally.

Sculptural and pillar candles

Pillars, swirls, bundts, crescents and arches have no jar to hold melted wax, so they drip. Stand them on a wide heatproof plate, keep them out of draughts, and expect the shape to change as they burn. Many people keep them unlit as decoration.

Quick reference

StepWhat to do
First burn2 to 3 hours, until the pool reaches the edge
Wick lengthAbout 5 mm before every burn
Longest burn4 hours, then rest for 2
Stop burningWhen about 1 cm of wax is left
StorageCool, shaded, lid or stopper on

Common questions

How do I make a soy candle last longer?

On the first burn, let the melted wax reach the edge of the jar before you put it out, which usually takes 2 to 3 hours. After that, trim the wick to about 5 mm before each burn and keep each burn under 4 hours.

Why is my candle tunnelling?

Tunnelling happens when a candle is put out before the wax has melted to the edge, most often on the first burn. To fix it, wrap foil around the rim leaving a gap over the wick, and burn until the surface is level.

How do I reuse the jar?

Stop burning when about 1 cm of wax is left. Pour hot, not boiling, water into the jar, let the wax float up and set, lift it out, then wash the jar with warm soapy water.

Safety

Never leave a burning candle unattended. Keep it away from children, pets, curtains and anything that can catch fire, and always burn on a stable, heatproof surface.